SILOMANN Bin Discharger
Discharge flow aid with bin discharger
SILOMANN Bin Discharger provide a proven way to start and maintain flow of “tough” bulk granular material. Even for those that may have resisted previous efforts involving the use of air pad, high pressure air blast or vibrator.
If ratholing, clogging and bridging are a way of life in your manufacturing process, the SILOMANN Bin Discharger may be a solution to these problems.
Components of SILOMANN Bin Discharger
A typical SILOMANN Bin Discharger consists of strategically-located unit, high-flow solenoid valve, electronic sequence controller and air receiver.
System can operate independently or can easily integrate with other equipment or automation system. Based upon flow requirement, system is set to sequentially pulse bursts of high-velocity air along the container wall. Up to an 8-foot diameter of material is dislodged with each pulse, promoting steady outflow.
The advantages and features SILOMANN Bin Discharger
- Start and move material fast.
- First in, first out controlled flow.
- Restore full bin capacity.
- Safe, non-damaging to vessel.
- Low air consumption.
- Installed and serviced from outside of container.
- 3-year warranty.
- Only one moving part.
- Non-jamming design.
- Sturdy, long-lasting.
- Mount to metal, concrete, fiberglass, etc.
- Operate above 480°C.
- Virtually maintenance free.
- Activates up to an 8-foot diameter of material per pulse.
Why SILOMANN Bin Discharger works
Powerful pulse of air are directed between the material and the container wall to sweep and lift material off sloping surface. Loosened material falls toward outlet, initiating downward flow of bin contents. Sequenced firing of strategically positioned system maintain positive and controlled outflow with minimum expenditure of air.
Where to use SILOMANN Bin Discharger
Metal, concrete, wood or fiberglass bin, hopper, silo, chute, batcher, conveyor transfer point, larry car, screen, feeder, centrifuge – any place granular or fine material build-up or bridge. Start and maintain flow of moist, dense or entangled material. Install from outside. Easily retrofit to any application.
Why use SILOMANN Bin Discharger
Cost and energy efficient. Use plant air. The average system use less than 10 CFM, significantly less than other systems. There is no damage, vibration, stress or wear to container wall. Easy installation. No need to empty bin or stop production. Eliminate labor-intensive, costly rodding, hammering, air lancing and shutdown for bin clean out.
Why SILOMANN Bin Discharger lasts
Only one moving part, the piston, features a dust-tight nozzle that quickly reclose and reseal after firing. Fines and feedback material are locked out, eliminating clogging and jamming. For added strength and wear resistance, parts are machined from blocks of high grade steel. Strict quality control ensure reliable, trouble-free performance.
Application of SILOMANN Bin Discharger
MINED MINERALS
- Aluminum, Barite, Bentonite, Borax, Coal (coke, mine run silt, pulverized), Copper, Diatomeaceous Earth, Gypsum, Iron Ore, Kaolin, Lead, Lignite, Limestone, Magnetite, Phosphate, Shale, Soda Ash, Taconite, Uranium.
CHEMICALS
- Adipic Acid, Ag Limestone, Aluminum Chloride, Boric Acid, Calcine, Calcium, Carbonate, Herbacides, Iron Oxide, Lead Chromate, Lime, Moly Disulfite, Polyacrilimide, Sodium Sulfite, Titanium Dioxide, Zinc (acetate, chromate, oxide).
FOODS
- Animal Feed, Brewers Grain, Brine (dust), Chocolate, Cocoa, Coffee, Feed, Flour, Grain, Hop, Meal, Peanut, Salt, Sugar, Tankage.
OTHERS
- Cement, Chalk, Cork, Detergent, Fertilizer, Fly Ash, Foundry Sand, Pharmaceutical, Plastic, Resin, Sludge.
Contact us
email : patrick [at] cemax [dot] com [dot] my whatsapp : +60 12 376 0589
