CEMAX World of Refractory Installation Equipment and Tools
Complete Refractory Installation Management Solutions
CEMAX World of Refractory (WoR) is one of the pioneers in setting up a one stop center to provide all your refractory installation application needs with the quality technology, after sales service, and at a competitive pricing.
We have supplies of access equipment, inspection equipment, demolition machine, installation tools and consumables, which would assure cost-effective for your next refractory management campaign.
Refractory Solutions are what we do best!
WoR Cooler Grate Plates
Reciprocating Coolers are an important part of any cement plant equipment.
WoR Cooler Grate Plates are fabricated to comply each of the cooler unique characteristic. They will allow you to reach peak performance in many aspects of your cooler.
- Our technology offer better heat recovery than conventional cooler grate plates.
- They also last longer thanks to a better wear protection of the rear section.
- They are available for many types of the original designers’ cooler grate plates.
- Their production performance is more stable with improved cooling and lower dust emissions.
WoR Brick Keying Jack
The brick keying jack is the most critical piece of equipment used in the tightening of each radial row of brick.
The jacking must take place with each row prior to keying the row in place. When using one of our bricking machines, the keying operation takes place every 15 minutes.
WoR Shim Driver Gun
The pneumatic shim driver gun helps reduce fatigue and increase productivity for the shim driving process.
We developed the best product for driving steel shim between key brick and offer our custom shank in all of the primary shaft configurations.
WoR Demolition Robot
Demolishing coating and brick linings is a perfect job for our demolition robot. There’s simply no faster or safer method.
The compact design of this robotic concrete breaker makes access easy, while the remote control makes the work safe and quick.
Efficiency is enhanced by the fact that the operator can choose the best position to perform and monitor the work, and not have to worry about vibrations, fumes or the risk of collapsing material or hot coating.
WoR Brick Thickness Tester
Unlike traditional lining measurement, which requires you to drill holes in your lining, the WoR Brick Thickness Tester only needs a small patch of coating to be scraped from the brick surface for you to measure lining thickness with up to 99% accuracy.
It takes just seconds to get a correct reading. You can measure a whole section of your kiln in less than 30 minutes.
Because it is quick and completely non-destructive, you can also make more measurements, more often. This gives you a truly accurate picture of your lining’s condition, and lets you plan and rationalize your lining replacement.
WoR Refractory Anchors
Our refractory anchor hardware is wire formed, die stamped, roll threaded and welded into a variety of anchoring products for castable monolithic, abrasion resistant and ceramic fibre refractory linings.
Refractory Anchors are manufactured Ceramic, Inconel, stainless steel, and other alloy fasteners that anchor a variety of high temperature linings, blankets, boards, and modules. Its utility is to secure or fasten those materials to line the inside of process equipment and furnaces.
WoR Refractory Insulation
Insulating refractories are used to reduce the rate of heat loss through furnace walls. These refractories have low thermal conductivity due to a high degree of porosity, with a desired porous structure of small, uniform pores evenly distributed throughout the refractory brick in order to minimize thermal conductivity.
For insulating a flue, we produce cleverly designed wrap jackets made from glass fibre cloth and blanket which are quick and easy to fasten in place.
WoR Sacrificial Sheet
Our sacrificial sheet helps to clean Kiln shell. The Heat resistant stainless steel: AISI 304 (1.4301) is great for refractory, with recommended thickness of 0.6 – 0.8 mm to avoid unstable lining. The Maximum sheet width: 1.5 m is made for easy installation.
WoR Temperature Vision
We offer innovative combustion optimization solutions. Our technology takes combustion optimization to the next level by delivering the most accurate flame temperature profiles on individual burners in a coal-fired boiler, which can improve fuel efficiency, lower emissions, and extend equipment life.
WoR Safety Inspection Cage
A lightweight, easily assembled safety inspection cage provided by us. Designed to be carried along while measuring, removing, and installing refractory. Easily carried by 2 people using flip-up handles attached to a safety cage.
WoR Kiln Cooler Fan
Our Cement Kiln cooler fan is also known as cement rotary kiln cooling axial fan. Mainly used in cement industry kiln body in the combustion of cement clinker when the kiln body cooling, can be used for the cooling of another rotary kiln, the fan is a removable air-cooled device. Cost effective and just as reliable as any of our competitors.
Where Do We Go
Australia, Bangladesh, Brunei, Cambodia, Canada, China, France, Germany, Hong Kong, India, Indonesia, Italy, Japan, Kazakhstan, Laos, Macau, Malaysia, Mexico, Myanmar, Nepal, New Zealand, North Korea, Pakistan, Papua New Guinea, Philippines, Singapore, South Korea, Sri Lanka, Taiwan, Thailand, United Arab Emirates, United Kingdom, United States of America, Vietnam